Clover Clover Love Merry Clover Series Thermal Adhesive Repair Powder 15g
'-Just stick it on the repair iron. -Repair details with powder.・ For repairing rift holes!・ Tobacco burn marks, worm-eaten holes, and cracks → Sprinkle on the part to be repaired → Adhesive repair with an iron. -The marks are inconspicuous and can be repaired cleanly. -An iron-bondable powder that is convenient for repairing cracks, holes, and tears in clothing and cloth products. -Since it is a powder, it can also repair details that fill small holes such as worm-eaten holes and burnt holes in cigarettes. -In addition to repairing, it can be widely used for bonding cloth. -Can be washed with water and dry cleaned.
Ingredients / quantity [Material] -Adhesive resin: Polyamide-Release paper: Paper Usage and dosage [How to use] -For repairing cloth products such as tearing, tearing, and hole repair. -For bonding appliqués and patches, and for making sewing crafts. (How to use) Iron is medium temperature (140-160 ℃) ・ Repair holes using self-fabric 1. Cut cleanly around the hole. 2. 2. Align the self-fabric with the same shape as the hole with the pattern and texture, and then cut it. Cut the backing cloth from the back of the hole to a size larger than the hole. 3. 3. Place a backing cloth behind the hole and sprinkle the powder on the hole. Smooth with your fingers to remove excess powder. Align the self-fabric with the hole, cover it, and press it on the release paper with a dry iron for 10 to 15 seconds. .. After the fabric has cooled, turn it over and spread the powder evenly over the unbonded area of the backing fabric. After removing excess powder, apply a release paper and press with a dry iron for 10 to 15 seconds. 5. Remove the release paper immediately and do not move it until the temperature of the adhesive part has dropped.・ Repair of small holes 1. Prepare an amount to fill the hole in a part of the self-fabric, and untie the fibers into lint. 2. 2. Mix about 1/3 of the lint with powder. (It is easy to put together by spraying) 3. Fill the holes with the mixture, sandwich the repaired part with two sheets of release paper, and press with a dry iron for 10 to 15 seconds. Press from the back of the hole in the same way.
JAN: 4901316680206
Ingredients / quantity [Material] -Adhesive resin: Polyamide-Release paper: Paper Usage and dosage [How to use] -For repairing cloth products such as tearing, tearing, and hole repair. -For bonding appliqués and patches, and for making sewing crafts. (How to use) Iron is medium temperature (140-160 ℃) ・ Repair holes using self-fabric 1. Cut cleanly around the hole. 2. 2. Align the self-fabric with the same shape as the hole with the pattern and texture, and then cut it. Cut the backing cloth from the back of the hole to a size larger than the hole. 3. 3. Place a backing cloth behind the hole and sprinkle the powder on the hole. Smooth with your fingers to remove excess powder. Align the self-fabric with the hole, cover it, and press it on the release paper with a dry iron for 10 to 15 seconds. .. After the fabric has cooled, turn it over and spread the powder evenly over the unbonded area of the backing fabric. After removing excess powder, apply a release paper and press with a dry iron for 10 to 15 seconds. 5. Remove the release paper immediately and do not move it until the temperature of the adhesive part has dropped.・ Repair of small holes 1. Prepare an amount to fill the hole in a part of the self-fabric, and untie the fibers into lint. 2. 2. Mix about 1/3 of the lint with powder. (It is easy to put together by spraying) 3. Fill the holes with the mixture, sandwich the repaired part with two sheets of release paper, and press with a dry iron for 10 to 15 seconds. Press from the back of the hole in the same way.
JAN: 4901316680206
