Nose Mask Pit Neo 9 pieces
- The nose mask is made of soft material so it’s stress-free, and inconspicuous. It is economical, as it can be washed with water and reused up to 10 times.The N95 compatible non-woven filter cuts 99% of ultra-fine particles of 0.1 μm. It can also be used by people who cannot wear masks, such as those working in the hospitality industry. Perfect for those who have problems with masks because their makeup gets messed up,their eyeglasses fog up, or who work in the hospitality industry, etc.
- This product is patented in USA, China and Korea, and is a registered design. This is a new version of the Nose Mask Pit series, which was first put on the market 13 years ago.
- Contents: 9 pcs that last for 45 days. They can be washed with water and reused up to 10 times, so it’s economical.Cents per day.
- Uses a PFE (0.1μm) filter that cuts 99% of dust and pollen.Kaken PFE Test Certified.
- Country of Origin: Japan; (Material) Filter: Non-woven polypropylene, Body: Polyethylene (soft material), Cover: Elastomer (soft material); Size (Nose mask): S size - Cover diameter: 0.4 inch (10.7 mm), Filter diameter: 0.3 inch (7.8 mm); M size - Cover diameter: 0.5 inch (11.5 mm), Filter diameter: 0.4 inches (9.2 mm); Just place it in your nose to keep pollen, PM2.5 and airborne viruses out.Especially recommended for those who don't like masks,and don't like pills.
Nose Mask Pit Neo is a mask that can be washed and used repeatedly. Can be used multiple times by washing. As a guide, wash HANALAC twice a day and use each for about 5 days.
*However, if used repeatedly, the function of the mask itself may deteriorate.
[Notes when washing with water]
Pinch vertically and wash gently. Be careful when you pinch it from the side, as the cover may come off and the filter may bend.
● After washing with water, put it in the attached case and store it.
● Please keep away from fire, direct sunlight, and high temperature and humidity.
● If unopened, it can be stored for 3 years.
1.) Place the nose mask pit neo on your index finger.
2.) Lightly press the frame part with your thumb.
3.) Insert the nose mask pit neo from above while pinching it.
4.) Lightly insert the lower part.
5.) Finally, adjust the position with your index finger. Make sure there is no slack.
[Correct wearing state]
-If inserted correctly without sagging in the center of the nose, it will not be noticeable when viewed from the front.
1.) Hold the nose lightly and pull the frame little by little.
2.) Pull each one slowly.
3.) When one comes out, pull out the other slowly to complete the removal.