Deer Roller Eb (Eternal Basic) Led Light Mini Led-05
A compact size LED light for gel nails that is thin and light and is convenient to carry with a USB cable. Comes with a 45-second and 60-second timer.
Ingredients : quantity / usage Usage and dosage [Usage] 1. Raise your left and right legs. 2. Connect the USB cable to the main unit and the USB port of the mobile battery. 3. 3. Press the button on the top to turn on the LED light. * Press once to light for 45 seconds, and press once again for 60 seconds. Press it a total of 3 times to turn off the light. 4. Place your hands under the light to cure the gel. * Be sure to place it on a horizontal surface before use.
Precautions for use ・ If you use other gels, problems may occur. (The curing confirmation test is performed only on the EB gel nail series.) ・ If the main body becomes hot, you may get burned if you touch it, so please be careful.・ Never modify, disassemble or repair. -Use with the correct voltage.・ Do not look directly at the LED lamp when it is lit, as it may hurt your eyes. -When cleaning this product, be sure to disconnect the USB cable from your computer or mobile battery, and wipe it with a soft cloth or a neutral detergent diluted with water. Please use after the main body is completely dry. (Never wipe with remover, alcohol, thinner, benzine, etc. The paint may peel off.) ・ Do not touch the LED bulb directly. There is a risk of burns. -Impact or drop on the main unit may cause a malfunction. -Connect the main unit and the USB cable first, and then plug it into the USB port of your computer or mobile battery.・ Do not perform any actions that may cause electric shock or burns.・ Do not use octopus foot wiring. It may cause fire, electric shock or malfunction.・ Do not use continuously for more than 30 minutes. -Do not use if the USB cable is damaged or if it is loosely plugged into the USB port. -Do not wrap the USB cable around the main unit, bend it forcibly, pull it, place a heavy object on it, or pinch it. It may cause disconnection.・ Do not bring it close to fire or leave it in direct sunlight on an electric carpet or a heater (near a fumarole). It may cause overheating, ignition or deformation.・ If something goes wrong, disconnect the power immediately. If you do not use the product for a long time, disconnect the USB cable from the main unit. Do not use the product in an abnormal situation such as the power does not turn on, high temperature heat generation, smoke, abnormal noise, or smell. -If dust adheres to the USB cable, it may cause a fire or electric shock due to poor insulation due to humidity. -Do not use this product for any purpose other than curing the LED gel.・ Before using the product, please read the precautions carefully and use the product correctly.・ Be sure to observe the precautions for use as they contain important safety information. Precautions for storage and handling ・ Do not connect or disconnect the USB cable with wet hands, soak the main unit in water, or store or use it in a humid or dusty place or around water. There is a risk of electric shock.・ Keep out of reach of infants and pets.
JAN:4511692161017
